Tascam HS-4000 - Manual (Page 24)

24
TASCAM HS-4000
3 – Preparation
Lock function
Press the MENU key while pressing and holding the HOME key
on the front panel to open the
LOCK SETUP screen where you
can disable or enable operation from the front panel and
external devices.
The front panel is divided into two sections, which can be locked
and unlocked separately.
Types of external devices are also divided into two categories,
which can be locked and unlocked separately.
If you press the button for a section, it changes from
UNLOCK to
LOCK (with a yellow background) and the locked area appears
dimmed.
Everything locked
 When the LCD Section is set to LOCK :
 If the display is touched, the following pop-up message
appears when the display (panel) is locked.
 If one of the keys around the display is pressed, the
following pop-up message appears when the display
(keys) is locked.
 When Transport is set to LOCK , if one of the transport
keys is pressed, the following pop-up message appears
when the transport is locked.
 When REMOTE/KEYBOARD is set to LOCK , if a remote
control or keyboard connected to a remote connector is
used, the following pop-up message appears when
remote/keyboard control is locked.
 When EXTERNAL CONTROL is set to LOCK , if an operation
is conducted using RS–232C, RS–422, PARALLEL or
ETHERNET, the following pop-up message appears when
external input is locked.