Tascam HS-4000 - Manual (Page 95)

TASCAM HS-4000
95
16 – Messages
The following is a list of messages that the HS-4000 shows in pop-up windows. Refer to this list to learn more about each message as
ell as how to respond to them. w
Message Details and responses Remarks
--- error ---
INFO WRITING An error occurred while writing information.
--- FORMAT ---
Completed Formatting has completed.
--- FULL FORMAT ---
FORMAT CFn?
This will erase all DATA on card Full formatting will be performed. n = 1 or 2
--- FULL FORMAT ---
Formatting CFn… Full formatting is occurring. n = 1 or 2
--- ONLINE Function ---
Changes Output Routing.
Touch OK to make ONLINE ********. Enabling and disabling the ONLINE function changes
the sound output routing. ******** = AlwaysON/switchable
--- QUICK FORMAT ---
FORMAT CFn?
This will erase all DATA on card Quick formatting will be performed. n = 1 or 2
--- QUICK FORMAT ---
Formatting CFn… Quick formatting is occurring. n = 1 or 2
--- RETAKE ---
Ignore last RECORD pass? A retake will be performed.
--- Shutdown ---
working … The unit is shutting down.
<AES31 ADL Info>
“ffffffff”
Size: **MB
yyyy/mm/dd hh: mm AES31 editing file information ffffffff = editing information file name
Bounce Selected Region
to file?.
“ffffffff” The selected region will be bounced to “ffffffff”. ffffffff = file name
CHn–n D–In: Fs convert On
Cannot select as Master clock. The sampling rate converter is ON for the digital input
that you tried to set as the clock master. n–n = 1–2, 3–4, 5–6, 7–8
Canceled The operation was canceled.
Cannot Change Now
Confidence Monitor cannot set to
ON
while current fs/rec channels. Confidence monitoring cannot be enabled with the
current sampling rate or recording track number
setting.
Cannot Change Now
Currently ** This item cannot be changed during playback, online
operation, timecode chase or recording. ** = Playing, ONLINE, Chasing TC or
Recording
Cannot Change Now
Fixed in current mode. In the current mode, settings are fixed and cannot be
changed.
Cannot Change Now
Inc.Play cannot set to ON
while Play Inhibit Time is Inf. Since the “ Play Inhibit Time ” item is set to “ Inf ”,
the “ Inc.Play ” item cannot be turned ON.
Cannot Copy
Not enough space on CFn There is not enough available space on the copy
destination card. n = 1 or 2
Cannot Copy.
"tttttttt"
already exist in current session. When assigning a take from another session to an
entry, that take is copied to the current session. In this
case, a file with the same name as the copied take
already exists in the current session.
RENAME button: change the name and copy the file
CANCEL button: do not copy
"tttttttt" name of take to copy
Cannot Copy.
Session already exists on CFn.
Overwrite session? A session with the same name already exists at the
copy destination. Do you want to overwrite that
session? n = 1 or 2
Cannot create more than
100 projects The maximum number of projects that can be created
has already been reached, so a new project cannot be
created.