Tascam HS-4000 - Manual (Page 34)

34
TASCAM HS-4000
5 – Projects
 LOAD buttons
Press the loaded playlist’s e button to open the playlist
selection screen, where you can view and work with playlist
entries.
If you press the
e button for a playlist that is not loaded, a
pop-up appears to confirm that you want to load that
playlist.
 Playlist name buttons
Touch to select a playlist.
In single mode, “
C ” (current) appears inside the icon of the
currently loaded playlist. In dual mode, “ A ” appears inside
the icon of the playlist loaded for player A and “ B ” appears
inside the icon of the playlist loaded for player B.
 INFO button
Touch this button to open a pop-up window that shows
information about the playlist that is currently selected.
If no playlist is selected, press this button to show
information about the current session.
 NEW/IMPORT button
Touch this to open a pull-up menu where you can select
NEW and IMPORT .
 MULTI SELECT button
Touch to enable the selection of multiple playlists.
 MENU button
Touch to open a pull-up menu where you can select LOAD
( LOAD to A and LOAD to B in dual mode), EDIT NAME
and DELETE .
 Scroll buttons
Use these buttons to scroll to the beginning or end of the
playlist or scroll one page (five lines) forward or backward.
You can also scroll through the playlist one line at a time
using the DATA dial.
Project operations
Creating new projects
1. Press the PROJECT key on the front panel to open the
PROJECT screen.
2. Touch the CREATE PROJECT button on the PROJECT
screen to open the CREATE PROJECT screen.
This screen has three pages.
CREATE PROJECT screen 1
You can make the following settings on this screen.
■ Project Name
Touch the Project Name button to open the screen where
you can edit the project name.
The maximum number of characters for project and
session names is 31. Extra characters are discarded.
■ Session Name
Touch the Session Name button to open the 1st
SESSION screen where you can change the name of the
first session.
On the
1st SESSION screen, the maximum number of
characters allowed is indicated by a yellow background.
■ Fs
Set that sampling frequency of the project.
48k–0.1% sampling frequency is pull-down compatible,
and 48k+0.1% is pull-up compatible.
■ BWF Chunk Fs
Set the sampling frequency written to the BWF chunk of
each recorded audio file. To use the actual sampling
frequency of the recordings, select Actual Rate.
For pull-up/pull-down, select Fake Rate to write 48k
instead of 48k±0.1%.
■ NEXT button
Touch to open the next page.
■ CREATE PROJECT button
Touch this to create a project with the current settings. If
a project with the same name already exists, this button
appears gray and you will not be able to create a new
project.
3. After you complete making settings, press the NEXT
button.
CREATE PROJECT screen 2
You can make the following settings on this screen.
■ Frame Type
Set the time code frame type.
■ Bit Length
Set the bit length used during recording.
■ PREV button
Open the previous screen.
4. After you complete making settings, press the NEXT
button.
CREATE PROJECT screen 3
You can make the following settings on this screen.
■ TIMELINE START TIME
Set the starting time used in timeline mode. Press the
EDIT button to open a screen where you can change the
starting time.
■ TIMELINE Rec Tracks
Set the number of recording tracks used in timeline
mode.
■ OTHERS
Touch the Current Setting button to use the current
settings of other parameters when creating the project or
touch Factory Preset to use the default settings.