Trimble Outdoors AgGPS 332 - Manual (Page 109)

AgGPS 332 GPS Receiver User Guide 99
NMEA-0183 Messages C
The PTNLDG message fields are defined in free format.
The maximum number of characters in each field is indicated above
( for example, 25 bps displayed as xxx,25,xxx instead of xxx,00025,xxx).
If a channel is disabled, the channel fields can be null fields (showing
commas only). If more than one channel is available, the message
should be repeated for each channel.
This message can be enabled using TSIP. If enabled, it is output at the
NMEA report rate.
Note – Because the contents of this NMEA message do not change
significantly during a one-second interval, the receiver outputs this
message at a maximum rate of 1 Hz.