Trimble Outdoors AgGPS 332 - Manual (Page 49)

AgGPS 332 GPS Receiver User Guide 39
Getting Started 4
4.1
The Home Screen
One example of a numeric field appears in the Satellite Freq screen. You
manually enter the broadcast frequency of a satellite service provider.
See Figure 4.5.
Figure 4.5 Example of a numeric field
When you start the receiver, the Home screen appears. See Figure 4.6.
Figure 4.6 The Home Screen
You can leave this screen running during operation. It enables you to
monitor the receiver status. To return to the Home screen after viewing
other receiver menus and screens, press
5 one or more times.
The AgGPS 332 receiver is a combined Beacon and Satellite DGPS
receiver. The information that appears on the Home screen depends on
how the receiver is configured.
41.1
Satellite DGPS mode
In this manual, references to Satellite DGPS apply only to the AgGPS
332 receiver. When the receiver is in Beacon DGPS mode, a
B , Beacon
Searching , Beacon Tracking , or Beacon FFT message appears in the
lower-left corner of the screen. To change between modes, press 4
and hold for five seconds. To display satellite differential information,
press
4 until an S appears in the lower left corner of the screen.
Satellite Frequency field
Srch í00 DOP00
S 1556.0000 Srch GPS status indicators
Satellite DGPS indicators