Trimble Outdoors AgGPS 332 - Manual (Page 82)

B Specifications
7 2 AgGPS 332 GPS Receiver User Guide
B.1
Introduction
This appendix details specifications for the AgGPS 332 receiver and the
compatable Trimble antennas.
B.2
AgGPS 332 Receiver Physical Characteristics
B.3
GPS Channels Performance
Item Description
Size 14.78 cm wide x 5.58 cm high x 21.59 cm deep
(5.70 in x 2.20 in x 8.60 in)
Power Nominal 350 mA at 12 V DC
Operating temperature –30 °C (–22 °F) through +70 °C (+158 °F)
Storage temperature –40 °C (–40 °F) through +85 °C (+185 °F)
Humidity Complies with Mil 810E Method 507.3 Procedure III Aggravated
Cyclic Humidity.
Ten 24 hour cycles of constant 95% RH, with cycling temperature
and dwells +30 °C (+86 °F) and +60 °C (140 °F). Unit sealed to +/-
5 PSID
Casing Low-profile UV-resistant plastic. Dust-proof, waterproof, shock
resistant, with recessed protected connectors.
Connectors 12-pin Deutsch connectors
Ports Two connection ports, both of which support RS-232 and CAN
Mounting Three holes for 10 mm (0.39 in) bolts
Compliance FCC Part 15 Class A, C-Tick, E-mark, CE-mark
Item Description
General 12-channel, parallel tracking L1 1571.42 MHz and L2
1227.60 MHz. C/A code and carrier phase filtered measurement.
Update rate 1, 5, 10 Hz
RTK speed accuracy 0.16 kph (0.10 mph)