Trimble Outdoors AgGPS 332 - Manual (Page 83)

AgGPS 332 GPS Receiver User Guide 73
Specifications B
RTK position accuracy Horizontal 2.5 cm (0.98 in) + 2 ppm, 2 sigma, and vertical
3.7 cm (1.46 in) + 2 ppm, 2 sigma, if all of the following
criteria are met:
• At least 5 satellites
• PDOP <4
• CMR corrections
• Standard format broadcast from a Trimble MS750, AgGPS
214, or equivalent reference station
Differential speed accuracy 0.16 kph (0.1 mph)
Differential position accuracy Less than 1 m (3.28 ft) horizontal if all of the following criteria
are met:
• At least 5 satellites
• PDOP <4
• RTCM SC-104 corrections
• Standard format broadcast from a Trimble MS750, AgGPS
214
, or equivalent reference station
OmniSTAR HP speed accuracy 0.16 kph (0.1 mph)
OmniSTAR HP position
accuracy 10 cm (3.94 in) after convergence, 2 sigma, if all the
following criteria are met:
• At least 5 satellites
• PDOP <4
• OmniSTAR HP corrections
Convergence time can vary, depending on the environment.
Time to the first fix (submeter accuracy) is typically <30 seconds;
time to the first useable fix (<10 cm accuracy) is typically
<30 minutes.
OmniSTAR XP position
accuracy 20 cm (7.87 in) after convergence, 2 sigma, if all the
following criteria are met:
• At least 5 satellites
• PDOP <4
• OmniSTAR XP corrections
Convergence time can vary, depending on the environment.
Time to the first fix (submeter accuracy) is typically <30 seconds;
time to the first useable fix (<10 cm accuracy) is typically
<30 minutes
Time to first fix <30 seconds, typical
Multipath mitigation EVEREST technology
Item Description