Trimble Outdoors AgGPS 332 - Manual (Page 78)

A Cables and Connectors
6 8 AgGPS 332 GPS Receiver User Guide
A.1
Introduction
This appendix contains pin-out information for standard and optional
cables. Use the information to troubleshoot communication problems
with the receiver and devices not supported by the standard and
optional cables.
A.2
Port A and Port B Connectors
Table A.1 gives pin-out requirements for the Port A, Port B, and Port C
connectors.
Table A.1 AgGPS 332 receiver Port A, Port B, and Port C
Pin Port A connector Port B connector Port C connector
1 Event In Event In Event In
2 RS-232 B Out RS-232 A Out
3 RS-232 B In RS-232 A In
4 CAN Hi CAN Hi CAN Hi
5 Ground Ground Ground
6 RTS Out RTS Out RTS Out
7 Power On/Off Power On/Off Power On/Off
8 CTS In CTS In CTS In
9 CAN Low CAN Low CAN Low
10 Battery +V Battery +V Battery +V
11 Battery –V Battery –V Battery –V
12 1 PPS Output 1 PPS Output 1 PPS Output