Trimble Outdoors AgGPS 332 - Manual (Page 16)

2 Overview
6 AgGPS 332 GPS Receiver User Guide
2.2
Receiver Connections
Figure 2.1 shows the connector ports on the AgGPS 332 receiver.
Figure 2.1 AgGPS 332 receiver connector ports
The two connectors (Port A and Port B) can perform the following
functions:
• accept power
• accept TSIP, RTCM, ASCII, and (if enabled) CMR inputs
• output RTCM, TSIP, and NMEA messages
• output 1 PPS signals
• provide support for the J1939 (CAN) serial bus
For more information about the inputs, outputs, and LCD display, see
the information in the rest of this section.