Receiver default settings – Trimble Outdoors AgGPS 332 User Manual
Page 84
B Specifications
7 4 AgGPS 332 GPS Receiver User Guide
B.4
L-Band Satellite Differential Correction
Receiver with OmniSTAR Support
B.5
Receiver Default Settings
Satellite differential
compatibility
OmniSTAR, WAAS, and EGNOS
NMEA messages
GGA 1 1
1
, GLL, GSA1, GST, GSV, GST, MSS, PTNLDG, PTNL PJK,
PTNL PJT, PTNL VGK, PTNL VHD, PTNLEV, PTNLID, PTNLSM, RMC1,
VGK, VTG1, XTE, ZDA
1
By default, the receiver is configured to output GCA, GSA, RMC, and VTG messages at a 1 Hz
(1 position per second) update rate.
Item
Description
Bit error rate
10
-5
for Eb/N of >5.5 dB
Acquisition and reacquisition time
<5 seconds, typical
Frequency band
1525–1559 MHz
Channel spacing
0.5 kHz
Item
Description
DGPS source
WAAS/EGNOS
Dynamics
Land
Minimum elevation
8°
AMU mask
3
PDOP mask
13
PDOP 2D/3D switch
11
DGPS mode
Auto On/Off
DGPS correction age limit
250 seconds
Pos fix rate
1 Hz
Item
Description