Tandberg Data 3000MXP - Manual (Page 22)

TANDBERG 3000 MXP User Manual
18
3.2 Using the Remote Control
The system is controlled with a remote control. Think of the remote control as a mobile phone
with number keys and call keys. Use the arrow keys and OK to navigate the menu. The
system
’
s most commonly used functions are also accessible directly from the remote control.
The Infra Red (IR) sensor for the remote control is located in front of the WAVE II Camera.
There is also a second IR-sensor located in the front of the Codec itself, which will be
automatically enabled if the WAVE II Camera is not connected.
1. Mic Off turns your microphone on
and off.
2. Arrow keys are used for navigation
in the menu and for moving the
camera when the menu is hidden.
3. Volume + and
–
adjusts the system
volume.
4. The Layout key toggles between full
screen and different display layouts.
5. Cancel takes you back one step in
the menu system. Use Cancel to
delete characters in an input field.
6. Press the Call key to place a call.
7. Camera presets define specific
camera positions. Press and hold a
number key for 1 second to save the
current camera position to that
number key. To activate a preset
whilst in a call, simply press and
release that number key.
8. Snapshot takes a snapshot of your
video. (Only while you are in a call)
9. The Presentation key switches to a
predefined presentation source.
10. Press OK/Menu to show the menu
and to select menu items.
11. Use Zoom + and
–
to zoom the
camera in and out.
12. Selfview displays your outgoing
video. Press Selfview again to turn
selfview off.
13. Store and recall your video contacts
via the system Phone Book for easy
placement of calls.
14. Use the red End Call key to end the
current call. Pressing this key when
not in a call will place the system in
Standby mode.
15. Number/Letter keys function in the
same manner as with a mobile or
cellular phone.
16. Press Touch tones when you are in
a call and need to dial extension
numbers etc. (instead of presets).