Tandberg Data 3000MXP - Manual (Page 54)

TANDBERG 3000 MXP User Manual
50
3.12.5 Assign Floor and Release Floor from
Participant
Assign Floor allows the chairman to select which of the conference participants that is to be
broadcasted to all other participants.
3.12.6 View Site and End View
(Not supported by TANDBERG MCU or MultiSite)
View Site allows you to view any participant in the conference regardless of whom having
floor and chair. Choose End View to go back to normal.
3.12.7 Disconnect Participant
Disconnect Participant allows the chairman to disconnect any participant in the conference. In
a multipoint call, this is equivalent to disconnecting a participant from the end call menu.
3.12.8 Terminate Meeting
Terminate Meeting allows the chairman to terminate the conference altogether. In a multipoint
call, this is equivalent to pressing End All Calls from the end call menu.
3.12.9 More about MultiSite (embedded MCU)
(Optional Feature)
Calling in to a MultiSite
Any system can be part of a MultiSite conference by calling in to a MultiSite. The dial-in
numbers to the MultiSite depends of the network that is used.
To dial in to the MultiSite on IP:

Dial the IP Number or the IP Address of the system. All sites can dial the same
number.
To dial in to the MultiSite on ISDN-PRI:

Dial the ISDN number of the system. All sites can dial the same number.
To dial in to the MultiSite on ISDN-BRI: