Tandberg Data 3000MXP - Manual (Page 99)

4 Administrator Settings
95
Manual The system will use a specific gatekeeper identified by Gatekeeper IP-address.
4.8.2.2.4 Gatekeeper IP-address
This is the gatekeeper IP-address that is used if you specify H.323 Call Setup: Gatekeeper
and Gatekeeper Discovery: Manual.
4.8.2.2.5 Call Manager Address
This is the call manager IP-address that is used if you specify H.323 Call Setup: Call
Manager.
4.8.2.2.6 H.323 Prefix
When dialing a number prefixed with digits specified by H.323 Prefix, and with Net: Auto, an
H.323 call will be placed.
Example:
H.323 Prefix is "555". Dialing "55582" with "Net:Auto" will select LAN.
4.8.2.2.7 Advanced H.323 Settings
The Advanced H.323 Settings only have an effect if they are supported by your IP
infrastructure.
NAT
NAT, Network Address Translation, is used in small LAN
’
s, often home offices, when a PC
and a videoconferencing system is connected to a router with NAT support. NAT support in
the videoconferencing system enables proper exchange of audio/video data when connected
to an external videoconferencing system (when the IP traffic goes through an NAT router).
When NAT is On, the NAT Server Address will be shown in the startup-menu: "My IP
Address: 10.0.2.1 (NAT)".
NAT Address
This must be the external/global IP-address to the router with NAT support. Packets sent to
the router will then be routed to the codec. In the router, the following ports must be routed to
the codec
’
s IP-address:
Port 1720
Port 5555-5560
Port 2326-2365
Please contact your TANDBERG representative for further information.