Tandberg Data 3000MXP - Manual (Page 26)

TANDBERG 3000 MXP User Manual
22
3.2.6 Number and Letter keys
Pressing a number key when you are outside a call will take you to the call menu. When you
are in a call, the number keys are used for Camera Presets. Press a number and you go to
the corresponding Camera Preset (see chapter 3.10.3 Camera Presets). However, when you
are in an input field where numbers are required, the system automatically goes to number
mode and you can dial numbers with the number keys as usual.
When you are in an input field where letters are required, the system automatically goes to
letter mode. Writing letters works like on a mobile phone. Press the key that corresponds to
your desired letter. Press the key as many times as you need to get the right letter. Change to
lower or back to upper case letters with the a/A key, and space with the 0 _ key.
To write numbers in a text input field, press the button through all the letters. Press once more
and the number will appear.
Example: How do I write "System 123" in the System Name input field (in General in
Administrator Settings)?
Press the 7-key four times to get an "S".
Press the #-key once to switch between upper case and lower case letters.
Press the 9-key three times to get a "y".
Press the 7-key four times to get an "s".
Press the 8-key once to get a "t".
Press the 3-key twice to get an "e".
Press the 6-key once to get an "m".
Press the 0-key once to get space.
Press the 1-key three times to get a "1".
Press the 2-key four times to get a "2".
Press the 3-key four times to get a "3".
3.2.7 Touch Tones
Sometimes you need to dial extension numbers with the number keys when you are in a call.
Pressing numbers will result in a camera preset. In these cases, press # to enable Touch
tones. An indicator will tell that touch tones are enabled. Now you can enter your extension
number with the number keys. Finish with OK to exit Touch tones mode.