Tandberg Data 3000MXP - Manual (Page 82)

TANDBERG 3000 MXP User Manual
78
4.4.3 AAC-LD 128kbps (stereo audio)
Specify a call rate for 128kbps AAC-LD. From this call rate and above, "128kbps AAC-LD" is
available. On lower call rates "64kbps AAC-LD" is available.
Stereo audio requires twice the bandwidth as mono CD-quality audio. Therefore we
recommend to enable stereo audio on high call rates only. To enable stereo CD-quality audio
you need to specify a call rate for when stereo automatically should be enabled. On lower call
rates, mono CD-quality audio "64kbps AAC-LD" will be enabled.
4.4.4 Natural Video
Choosing Natural Video will enable 60 fields per second true interlaced picture for high motion
video.
Auto: Natural Video Auto will enable transmission of Natural Video from 768 kbps
and above. Reception of Natural Video is in this case always enabled.
Off: Natural Video Off will disable both transmission and reception of Natural
Video.
Custom: 384 kbps and above to 1920 kbps and above
4.4.5 Video Quality
The different video sources need different Video Quality Settings. Main Camera, VCR, AUX
and Split Screen have Motion as default. PC, Document Camera and VNC have Sharpness
as default.
Motion: Optimized for smooth motion video (CIF/SIF for low bandwidths, iCIF/iSIF
for high bandwidths).
Sharpness: Optimized for sharp video (4CIF/4SIF, VGA, SVGA, XGA).
Auto:
The system chooses the best of Motion or Sharpness depending on
picture layout and bandwidth.