Tandberg Data 3000MXP - Manual (Page 42)

TANDBERG 3000 MXP User Manual
38
3.10 Move Camera
There are several ways to move the camera:

Choose Move Camera from the main menu. Use the arrow keys to pan and tilt the
camera. Press OK when done.

When the menu is hidden, the arrow keys will work on the camera. Hide the menu
with the Cancel (X) key and adjust the camera with the arrow keys.

Use Camera Presets. Press a number and the camera will move to a predefined
position (when you are in a call). See chapter 3.10.3 Camera Presets
.

Use Automatic Camera Tracking. See chapter 3.13.5 Automatic Camera Tracking.

Use the TANDBERG tracker (see separate documentation).
3.10.1 Zoom
The zoom key on the remote control will zoom the picture in and out (+ and -).
3.10.2 Far End Camera Control
When you are in a call, you can also move the far end camera (if the far end side supports
H.281, Far End Camera Control). Choose Move Camera from the Main Menu. A dialog box
offers you the options: Near End and Far End. Near End means your own camera. Far End
means the far end's camera. Choose Far End to move the Far End camera.
How to use Far End Camera Control:
1. Choose Move Camera form the Main Menu when you are in a call.
2. Choose Far End.
3. Move the far end camera with arrow keys and zoom.
4. Press OK when done to escape far end camera control mode.