Tandberg Data 3000MXP - Manual (Page 84)

TANDBERG 3000 MXP User Manual
80
4.5 Audio
Audio contains the settings:

Inputs

Outputs

Echo Control

Stereo Settings

Audio Leveling (AGC)

Alert Tones and Volume
4.5.1 Inputs
Mic 1- 2 and Audio input 3-4
By default, all inputs are enabled. Just plug in an audio source and it is active. Audio inputs
that are On will automatically be mixed. Unconnected inputs will automatically be muted.
Select Off to prevent audio/noise from connected but unused inputs. The activated audio
sources are stored on camera presets.
Mic 1 and 2 are intended for electret type microphones. The microphone inputs are balanced
with 24V phantom power.
Audio input 3 (AUX) is intended for connection to external playback devices or to telephone
add-on hybrids. As there is no acoustic echo canceller on this input it should not be
connected to any microphones. The audio source connected to this input will be heard from
the local speaker as well.
Audio input 4 (VCR) is intended for connection to a VCR or DVD player. It can also be
connected to other external playback devices. As there is no acoustic echo canceller on this
input it should not be connected to any microphones. The audio entering this input will be
heard from the local speaker as well. If Auto is selected, the audio from the VCR will only be
heard when VCR is selected as video source.