Tandberg Data 3000MXP - Manual (Page 34)

TANDBERG 3000 MXP User Manual
30
3.6 Answer an incoming Call
You can receive calls anytime, even when the system is in standby mode. But remember to
switch the system on using the On/Off switch located at the rear of the system as described in
chapter 3 General Use.
How to answer an incoming call:
1. To accept an incoming call, press OK or the green key on the remote control.
2. Press the red key on the remote control to reject the incoming call.
3. If you do not want any incoming calls, choose Do Not Disturb. If Do Not Disturb is on,
the system will automatically reject all incoming calls. See Chapter 3.8.3 Do Not
Disturb for further details.
If Auto Answer is set to On, an incoming call will connect automatically. You can set Auto
Answer On, On + Mic Off or Off in Administrator Settings\General Settings, see chapter 4.1.4
Autoanswer.