Tandberg Data 3000MXP - Manual (Page 92)

TANDBERG 3000 MXP User Manual
88
4.6.6 Picture Control
Focus, Brightness and White balance are set for auto focus, auto brightness and auto white
balance by default. If you need to set focus, brightness and white balance manually, go to
Picture Control in Video Settings.
Focus
Auto In Auto mode the focus is continuously updated. When moving the camera, the
system will use auto focus for 5 seconds to set the right focus of the new
camera position. After 5 seconds auto focus is turned off to prevent continuous
focus adjustments of the camera.
Manual
Use the arrow keys to manually adjust the focus.
Brightness
Auto
In Auto mode the brightness is continuously updated.
Manual Use the arrow keys to manually adjust the brightness.
White balance
Auto In Auto mode the white balance is continuously updated.
Manual: To update the white balance manually, select Manual and press OK. A white
object should be held in front of the camera a few seconds before and after
selecting Manual white balance.
4.6.7 Video Name
As a default, each video input is given the name: Main Cam, PC, Doc Cam, VCR, AUX and
VNC. The video names cannot exceed eight characters. The names correspond to the video
names in the Presentation Menu (Choose Presentation from the main menu and open the
Main Video or Presenation Video pop up menu). If video names are changed, you will see the
changed name appear in the Main Video and Presentation Video menus.