Toshiba Strata CS - Manual (Page 222)

A-2 S TRATA CS C LIENT U SER G UIDE
BETA DOCUMENT - PRELIMINARY & CONFIDENTIAL
Call handling commands _______________________________
As soon as you press Flash to put a call on hold, you will hear a context-sensitive
menu of call handling options. The caller does not hear these menu prompts. At
any time while listening to the prompts, you can press
Flash again to reconnect
to the caller.
Quick call commands __________________________________
Pressing * at a dial tone gives you quick access to the commands listed in the
following table.
Call Handling Commands
With a call on the line, press Flash, and then...
1 Transfer the call.
2 Send the call to voice mail.
3 Disconnect from the call.
4 Reconnect to the call.
5 Create a conference call.
6 Park the call.
7 Silent hold (stops menu until next keypress).
8 Send a Flash to Centrex/PBX service beyond Strata CS.
# Get a dial tone (start another call).
Flash Reconnect to the call.
Quick call commands
*0 Hear your phone’s station ID and extension.
*10
Enable and disable hands-free answering. See “Using
hands-free answering” on page 4-9.
*11
Enter an account code for the current call or the call you
are about to dial.
*12
Enable adn disable voice-first answering. See “Using
voice-first answering” on page 4-10.