Ultratec 4425 - Manual (Page 11)

C H A P T E R
1
SET-UP
SET-UP • 9
All you need to do to set up the Superprint 4425 is plug it in! You
have to plug in the AC adapter for 24 hours to charge the
batteries. The ring flasher will not work properly until the
batteries are fully charged. After that, leave the AC adapter
plugged in all the time unless you need to use the batteries during
a power outage or while traveling.
The best way to use the Superprint 4425 is to plug in a telephone
line. This is called direct connect. But if you cannot plug in a
telephone line, you can also make and answer calls by putting a
telephone handset in the Superprint 4425 acoustic cups.
Plugging in power and a telephone line p. 10
About the control key p. 12
About the clock + p. 12
Setting the clock + p. 13
Superprint 4425 function keys p. 14
About Auto ID
™
p. 17
About the printer + p. 18
About the built-in help feature + p. 19 H Ctrl
3 Ctrl
9 Ctrl
T Ctrl
Ctrl