Turning off turbo code interrupt – Ultratec 4425 User Manual
Page 30
If you see INTERRUPT on your display while the ring flasher
flashes, it means that the other person wants to interrupt you and
start typing. You can choose to stop and let the other person go
ahead or continue typing yourself. You may also see INTERRUPT
on your display even when you are not connected in Turbo Code
if the other person taps the spacebar a few times.
Turning off Turbo Code interrupt
+
You can turn off interrupt so that the other person cannot send an
interrupt to you. Turning off interrupt does not affect outgoing
interrupts. You can still send an interrupt to the other person.
Follow these steps to turn off interrupt:
1.
Press the options key (
+
). You will see PRINT
(UP/LOW) CASE on the display.
2.
Press the
key until you see INTERRUPT (ON) on the
display.
3.
Press the
to change the setting to OFF.
4.
Press the
key to save the new setting and leave options.
Esc
Spacebar
Return
9
Ctrl
9
Ctrl
28 • CALLING