Ultratec 4425 - Manual (Page 85)

During an ASCII call
If you do not receive a clear message during an ASCII call, try:
• Changing the parity setting
• Changing the duplex option.
• Using the other baud rate (110 or 300).
If the code option is set to automatic and your Superprint 4425
loses the ASCII connection, the Superprint 4425 will display NO
ASCII CONNECTION! and change to Baudot code. To return to
ASCII code, you must turn on ASCII yourself. See Turning on
ASCII code and changing options
on page 81.
If the code option is set to ASCII and your Superprint 4425 loses
the connection, it waits until the other person changes to ASCII or
you change the code option setting to automatic or Baudot with
the code key (
+ ). 0 Ctrl
CODES • 83