Ultratec 4425 - Manual (Page 47)

Turning off the auto-answer relay
voice announcer
+
When the Superprint 4425 answers the telephone, it sends out
the relay voice announcer message before it sends your auto-
answer memo. If you do not want the Superprint 4425 to send the
message, follow these steps to turn it off:
1. Press the options key ( + ). You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until you see AUTO ANSW VOICE (ON) on
the display.
3. Press the to change the setting to OFF.
4. Press the key to leave options.
Clearing auto-answer messages +
Most of the time you will clear messages after you read them, but
you can also clear them by following these steps:
1. Press the clear key ( + ). You will see CLEAR
(CONVERSATION) on the display.
2. Press the to change the setting to AA MESSAGES.
3. Press the key. You will see CLEAR MESSAGES Y/N.
4. Press the key. You will see MESSAGES CLEARED on the
display. (Press the key if you decide not to clear messages.) N
Y
Return
Spacebar
8 Ctrl
8 Ctrl
Esc
Spacebar
Return
9 Ctrl
9 Ctrl
AUTO-ANSWER • 45