Ultratec 4425 - Manual (Page 25)

CALLING • 23
Signal light and display
The signal light (and display in direct connect) show what is
happening on the telephone line in the following ways:
Signal light Display Telephone line
Steadily on Dial tone
Flashing slowly RINGING Telephone ringing
Flashing quickly BUSY Telephone busy
Flickering Person picking up
telephone or speaking
Dialing tips
You may need to type a 9 or other number to reach an outside
line if you are using the Superprint 4425 in an office. The exact
method of dialing will depend on your local telephone system.
Dialing a TTY call should be the same as dialing a voice call.
Use a comma to put in a one-second pause. For example: 9,222
5555.
For long distance, include a 1 and the area code.
Use an ! for a hook flash. A hook flash is used in a voice mail
system or to transfer a call.
You cannot use * and # with pulse dialing.
Redialing the same number +
Follow these steps to redial the last number you dialed:
1. Press the dial key (hold down the key and press the
key).
You will see TYPE NAME, NUM, OR CR on the display.
2. Press the key. Return
1 Ctrl
1 Ctrl