Ultratec 4425 - Manual (Page 66)

Setting the out-going auto-answer
memo
+
Follow these steps to choose any memo as your out-going auto-
answer memo:
1. Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
2. Press the key until you see ANSWER MEMO on the
display.
3. Type a memo name or press the to read through the
list of memos. Use the key to move back through the
list.
4. Press the key when the display shows the name of the
memo you want to use.
5. Press the key to leave options or press the key to go
to the next option.
Changing the auto-answer
password
+
Follow these steps to change your password:
1. Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
2. Press the key until you see CHANGE AA PSWD (NO) on
the display.
3. Press the to change the setting to YES.
4. Press the key.
5. Type a password. You can use up to 8 characters. You cannot
use the @ # % & or * symbols.
6. Press the key to save the new password.
7. Press the key to leave options. Esc
Return
Return
Spacebar
Return
9 Ctrl
9 Ctrl
Return Esc
Return
Backspace
Spacebar
Return
9 Ctrl
9 Ctrl
64 • OPTIONS