Ultratec 4425 - Manual (Page 65)

4. Press the key to save the setting and leave options or
press the key to save the setting and go to the next
option.
Setting pulse dialing +
The Superprint 4425 is set for tone dialing, which is correct for
almost all telephone lines. You can, however, change the setting
to pulse dialing if your line does not accept tone dialing. This
setting remains changed until you change it again or reset the
Superprint 4425 or lose power. Follow these steps to set pulse
dialing:
1. Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
2. Press the key until you see USING (TONE) DIAL on the
display.
3. Press the to change the setting to PULSE.
4. Press the key to save the setting and leave options or
press the key to save the setting and go to the next
option.
Setting the number of auto-answer
rings
+
Follow these steps to change the auto-answer rings setting to any
number between 2 and 9 or TS:
1. Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
2. Press the key until you see AUTO ANSWER RING (2) on
the display.
3. Press the to change the setting to a number between 2
and 9 or TS.
4. Press the key to save the setting and leave options or
press the key to save the setting and go to the next
option.
Return
Esc
Spacebar
Return
9 Ctrl
9 Ctrl
Return
Esc
Spacebar
Return
9 Ctrl
9 Ctrl
Return
Esc
OPTIONS • 63