Ultratec 4425 - Manual (Page 42)

How auto-answer works
The Superprint 4425 answers a call by sending the relay voice
announcer message and the out-going auto-answer memo.
The relay voice announcer message says, “Please use text
telephone or dial relay.” It also adds a relay number if you have
saved one. See Using the relay voice announcer on pages 34
and 35 for more information about the relay voice announcer
message.
The out-going auto-answer memo is a short text message which
says, “You have reached an answering machine, please leave a
message, GA.” You can change this message to say anything else
you want or you can choose any of your other memos to use as
your out-going auto-answer memo.
If the caller leaves a TTY message, the Superprint 4425 saves the
message, prints it if the printer is on, and adds 1 to the number of
messages. The Superprint 4425 hangs up after 45 seconds of
silence.
Note: Auto-answer cannot record voice messages.
About auto-answer memory
Auto-answer memory has enough room for at least 100 short
messages. The only limit to the number of auto-answer messages
that can be saved is the size of auto-answer memory, which is
22,000 characters.
If the memory does fill up, MESSAGE MEMORY FULL is added to
the last message and no more messages are saved. The Superprint
4425 will still answer the telephone when memory is full if the
printer is on. It will still count messages and print them. If auto-
answer memory fills up and the printer is off, the Superprint 4425
stops answering the telephone.
40 • AUTO-ANSWER