About auto id, Turning off auto id – Ultratec 4425 User Manual

Page 19

Advertising
background image

SET-UP • 17

About Auto ID

The Auto ID

feature alerts a hearing person that you are calling

from a TTY. It alerts the person by sending several audible tones
over the telephone line every few seconds. Auto ID helps
emergency services such as 911 detect that you are calling by
TTY.

Auto ID comes on when you turn on your Superprint 4425 and
continues until you start a conversation. If you are on-line, you
will see SENDING AUTO ID on the display every time the
Superprint 4425 sends out tones.

Auto ID will also begin sending tones whenever no one types for
a few minutes during a conversation. It continues until someone
starts typing.

Turning off Auto ID

+

You can turn off Auto ID by following these steps:

1. Press the options key (

+

). You will see PRINT

(UP/LOW) CASE on the display.

2. Press the

key until you see AUTO ID (ON) on the

display.

3. Press the

to change the setting to OFF.

4. Press the

key to save the new setting and leave options.

Note: When you turn off Auto ID, it stays off and will not send
tones until you turn it on again. This means that an emergency
service center such as 911 cannot use Auto ID tones to detect
your TTY call.

Esc

Spacebar

Return

9

Ctrl

9

Ctrl

Advertising