Ultratec 4425 - Manual (Page 38)

36 • ADVANCED CALLING
Auto busy redial
+ +
When a number is busy, the Superprint 4425 can redial the
number by itself up to 15 times. It will let you know when it
makes a connection by flashing the ring flasher. You must be
using direct connect to use this feature. Follow these steps to turn
on auto busy redial:
1. Dial a number. If the number is busy, the display says BUSY.
2. Hold down the key and the key and press the
key
(
+ + ). The display says AUTO REDIAL 01. The
Superprint 4425 will redial each minute. The display shows
how many times the Superprint 4425 has redialed.
3. The ring flasher flashes when the line is ringing. When you
see an answer message on the display, type a greeting.
Press the key to stop auto busy redial.
Change to other TTY
+ +
If you want to change TTYs in the middle of a conversation, you
can put the call on hold, go to another TTY, and tell the
Superprint 4425 to hang up. You must be using direct connect to
use this feature.
1. Hold down the and keys and press the key
( + + ) to put the call on hold. Leave the Superprint
4425 on.
2. Go to another TTY connected to the same telephone line
(either direct connect or acoustic), turn the TTY on and type
three periods. The Superprint 4425 will hang up.
3. Continue your conversation from the second TTY.
Note: This feature is useful for changing telephone extensions in
your home. It is not meant to be used to transfer calls in an office.
Follow these steps to use the change to other TTY feature.
C Shift Ctrl
C Shift Ctrl
C Shift Ctrl
Esc
Return Shift Ctrl
Return Shift Ctrl
Return Shift Ctrl