Ultratec 4425 - Manual (Page 70)

Turning off interrupt +
Follow these steps to turn off incoming interrupts:
1. Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
2. Press the key until you see INTERRUPT (ON) on the
display.
3. Press the to change the setting to OFF.
4. Press the key to save the setting and leave options or
press the key to save the setting and go to the next
option.
Changing ASCII seek time +
This option is available only if you have ASCII code. Follow these
steps to change the ASCII seek time:
1. Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
2. Press the key until you see ASCII SEEK TIME (3) on the
display.
3. Type a number to change the setting to 0 or any number
between 2 and 9.
4. Press the key to save the setting and leave options or
press the key to save the setting and go to the next
option.
Turning off the auto-answer
relay voice announcer
+
Follow these steps to stop auto-answer from sending out the relay
voice announcer message:
1. Press the options key ( + ). You will see PRINT (UP/LOW)
CASE on the display.
9 Ctrl
9 Ctrl
Return
Esc
Return
9 Ctrl
9 Ctrl
Return
Esc
Spacebar
Return
9 Ctrl
9 Ctrl
68 • OPTIONS