Ultratec PRO80TM - Manual (Page 13)

SETUP
CONNECTING POWER & PHONE LINE
1. If you are setting up a new Superprint Pro80 for the first time, pull
the plastic tab out of the battery compartment and gently pull the
printer guard out of the printer compartment.
2. Plug the AC adapter into an electrical outlet.
S E T U P • 7
CAUTION:
To avoid damaging
your TTY or telephone
system, plug the
Superprint Pro80 into
only a standard tele-
phone line. Do NOT
plug the TTY into a
digital telephone sys-
tem. Improper connec-
tion may damage the
TTY and void your
warranty.
C H A P T E R
2
3. Plug the AC adapter into the round jack on the back of the TTY.
Leave the AC adapter plugged in at all times.
4. Plug one end of the cord into one of the telephone jacks on the back
of the TTY. (The second jack may be used for a telephone or
signaler).
5. Plug the other end of the telephone cord into a standard telephone
wall outlet.
Plug one end of the
telephone line into a
telephone wall outlet.
Plug the other end of the
telephone line into either
telephone jack on the back
of the Superprint Pro80.
Plug the AC adapter cord
into the jack on the back
of the Superprint Pro80.
Plug the AC adapter into
an electrical outlet.