Ultratec PRO80TM - Manual (Page 30)

2 4 • A D V A N C E D C A L L I N G
Placing a Call Using Relay Dial
1. Make sure the Superprint Pro80 is on. The Power light should be lit.
2. Press the button. DIALING... is displayed followed by the
number of the TRS that you have programmed for this button.
3. When the Relay service TTY starts ringing, the Superprint Pro80
Signal light flashes slowly and LINE IS RINGING is displayed.
4. When the Communications Assistant (CA) answers the call, his or
her greeting is displayed on your TTY. Type instructions for the CA
such as the number and the name of the person you wish to call. The
CA will dial the number of the person you are calling and type
information such as whether the phone is ringing or busy.
5. When the person answers the phone, the CA will introduce the call
and begin typing everything that the other person says.
6. When the other person says GA, begin typing what you want to say.
The CA will read what you type to the person you are calling.
7. Continue your conversation.
Relay
4. Press . ** RELAY
NUMBER SAVED ** is
displayed.
Enter
** RELAY NUMBER SAVED **
Enter
Press
1. Turn on the Superprint Pro80.
2. Hold down the key and
press . RELAY NUMBER
is displayed.
Relay
Program
RELAY NUMBER>
Relay
Press
Program
Hold
down
3. Type the telephone number for
your local Telecommunications
Relay Service (TRS).
You may use punctuation such as
dashes. There is space for up to
20 characters. Use the
key to correct mistakes.
Back Space
RELAY NUMBER> 1 <800> 555-1234
Type
RELAY DIAL
(without E-Turbo)
Programming the Relay Phone Number
Place a Relay call
with one button.
When you program the
button, you save
time whenever you
place a relay call. With
one touch, you can
automatically dial the
phone number of your
relay service.
Relay