Ultratec PRO80TM - Manual (Page 17)

CALLING & ANSWERING
PLACING A CALL
Dial a Number that You Type
C A L L I N G & A N S W E R I N G • 1 1
You have three
options with the
Dial button:
• Type the number of
the person you are call-
ing.
• Use a number that is
stored in the Directory.
• Redial the last num-
ber that was dialed.
C H A P T E R
3
How do I use the
Emergency button?
See Chapter 4,
“Advanced Calling,” to
learn how to use the
button.
Program this button
now so that you will be
ready in an emergency
(see “Programming the
Emergency Number” on
page 22).
Emergency
1. Make sure the Superprint Pro80
is on. The Power light should be
lit.
2. Press the button. TYPE
NAME OR NUMBER is
displayed.
Dial
TYPE NAME OR NUMBER> _
Dial
3. Type the number you are calling.
Use the
key to correct
mistakes.
4. Press to dial the number.
DIALING... is displayed
followed by the telephone
number.
Enter
Back Space
DIALING...5551234
Enter
...Then
press
Type...
5. When the other TTY starts
ringing, the Signal light flashes
slowly and LINE IS RINGING is
displayed.
If the other TTY is busy, LINE
IS BUSY is displayed. Try again
later to place the call or see
“Automatically Redial a Busy
Number” on page 14.
... LINE IS RINGING ...