Ultratec PRO80TM - Manual (Page 28)

2 2 • A D V A N C E D C A L L I N G
Programming the Emergency Number
1. Turn on the Superprint Pro80, the Power light should be lit.
2. Hold down the key and press . EMERGENCY
NUMBER is displayed.
3. Press to clear the preprogrammed number.
4. Type the number you wish to call in an emergency such as the local
police or fire department.
5. Press . ** EMERGENCY NUMBER SAVED ** is displayed.
RELAY DIAL WITH E-TURBO
This section is for people whose Telecommunications Relay Service (TRS)
supports E-Turbo technology. Please refer to the next section, “Relay Dial
(without E-Turbo),” if E-Turbo is not available in your area.
Turning E-Turbo On
1. Press .
2. Press until E-TURBO is displayed.
3. Press the to select <ON>.
4. Press . **E-TURBO ON** is displayed briefly.
5. Press to exit the Options menu.
Programming the E-Turbo Relay Phone Number
1. Check with your TRS for the best number to use for E-Turbo calls.
2. Turn on the Superprint Pro80.
3. Hold down the key and
press . RELAY
NUMBER is displayed.
4. Type the access number of your
TRS. There is space for up to 22
characters. Use the
key
to correct mistakes.
5. Press . ** RELAY
NUMBER SAVED ** is
displayed briefly.
Then, USER PREF is displayed.
6. Type the letter(s) of the relevant setting from the following chart.
Enter
Back Space
Relay
Program
Esc
Enter
Spacebar
Options
Enter
Clear
Emergency Program E-Turbo calls are
more streamlined.
If your relay service is
E-Turbo compatible,
you can take advantage
of the most streamlined
way to call through
relay. With E-Turbo,
many of the details of a
relay call are automati-
cally handled for you:
1. You dial the phone
number of the person
you are calling. Your
Superprint Pro80 auto-
matically connects to
your TRS.
2. There is no need to
interact with the
Communications
Assistant (CA).
3. Your preferences are
automatically sent to
the TRS, such as your
preference for a male or
female CA or which
long distance carrier to
use.
RELAY NUMBER>
Relay
Press
Program
Hold
down