Ultratec PRO80TM - Manual (Page 42)

3 6 • U S I N G C A L L E R I D
VIEWING CALLER ID INFORMATION
When Receiving Calls
Press the Caller ID
button when Auto-
Answer is also on.
If you have Auto-
Answer on in addition
to Caller ID, you will
need to press
before reviewing Caller
ID entries.
For more information
on Auto-Answer, please
see Chapter 7.
Caller ID
1. The Ring Flasher flashes slowly
when the Superprint Pro80
receives a call. LINE IS
RINGING is displayed one time.
... LINE IS RINGING ...
2. While the line is ringing, the
Caller ID information is
displayed. If you choose to
answer the call, you may do so.
ULTRATEC INC 2385400
If your Caller ID service includes
both name and number, both are
displayed. If your service
includes number only, the
number is displayed along with
the date and time of the call.
2385400 11/03 9:30AM
3. The Caller ID information is
displayed for eight seconds after
the line stops ringing. If you do
not pick up the call, 1 NEW
CALL is displayed.
1 NEW CALL
Reviewing Caller ID Entries
1. Make sure Caller ID is on. X NEW CALLS should be displayed.
You can still review previous Caller ID entries even if 0 NEW
CALLS is displayed.
2. Press to begin reviewing Caller ID entries.
The Caller ID information from
the most recent call is displayed.
Each call is numbered on the left
side of the display.
1 ULTRATEC INC 2385400