Dial using, Dialing prefix – Ultratec PRO80TM User Manual
Page 51
P E R S O N A L I Z I N G G E N E R A L O P T I O N S • 4 5
The tones are sent if someone picks up your call but no one begins typing.
SENDING AUTO ID is displayed each time the tones are sent. Tones are
also sent if no one types for a few minutes during a conversation. Auto ID
turns off whenever you start typing.
NOTE: If the message, SENDING AUTO ID appears on your display,
you may still do any of the Superprint Pro80’s functions.
It is recommended that you leave Auto ID on all the time so it will always
be available in the event of an emergency. To turn off the Auto ID feature:
1.
Press .
CODE < AUTOMATIC> is displayed.
2.
Press
to scroll through the options until AUTO ID < ON> is
displayed.
3.
Press the
to change the setting to <OFF>.
4.
Press
to save this setting and move to the next option in the
menu, or press
to exit the Options menu without making any
changes.
Dial Using
The Superprint Pro80 is set for touchtone dialing, which is correct for
almost all telephone lines. With the Dial option, you can change the
setting to pulse dialing if needed.
1.
Press .
CODE < AUTOMATIC> is displayed.
2.
Press
to scroll through the options in the Setup menu until DIAL
USING < TONE> is displayed.
3.
To change the setting to <PULSE>, press the
.
4.
Press
to save this setting and move to the next option in the
menu, or press
to exit the Options menu without making any
changes.
Dialing Prefix
A dialing prefix can be handy if you frequently have to type a series of
numbers before dialing a phone number. This is common in office settings
where a code such as “9” is required to obtain an “outside line.” When a
Dialing Prefix is saved, the Superprint Pro80 will always dial the prefix
before dialing a number from the Dialing Directory. The Dialing Prefix is
not used when dialing from the keyboard.
1.
Press .
CODE < AUTOMATIC> is displayed.
2.
Press
to scroll through the options until EDIT DIALING
PREFIX <NO> is displayed.
3.
Press the
to change the setting to <YES>.
4.
Press .
DIALING PREFIX is displayed.
5.
Type the prefix. There is room for up to 29 characters.
6.
Press
to save this setting and move to the next option in the menu,
or press
to exit the Options menu without making any changes.
Esc
Enter
Enter
Spacebar
Options
Esc
Enter
Spacebar
Options
Esc
Enter
Spacebar
Options