Lcd display settings – Zebra Technologies Z6Mplus User Manual

Page 22

Advertising
background image

4

Z4Mplus/Z6Mplus User Guide

13163L Rev. 3 5/20/2004

Introduction

Front Panel

LCD Display Settings

Table 1

shows front panel LCD display settings that you may wish to adjust and what they

mean. Refer to

Basic Configuration on page 53

for more detailed information on each setting.

Table 1 • Front Panel LCD Display Settings

LCD Display

Meaning/Available Settings

PRINTER READY

Ready to print labels or to configure the printer. All printer self-
tests have been performed successfully.

DARKNESS

The larger the number, the darker the print. The range is 0 to 30,
with a default setting of 10.

PRINT SPEED

The print speed is given in inches per second. The larger the
number, the faster the label prints.

TEAR OFF

Establishes the position of the media over the tear-off bar after
printing.

PRINT MODE

Tear-Off (default setting), Peel-Off, Cutter, Rewind. For more
details, see

Table 2

.

MEDIA TYPE

Non-continuous (default setting), Continuous

SENSOR TYPE

Web (default setting), Mark

SENSOR SELECT

Auto Select (default setting), Reflective, Transmissive

PRINT METHOD

Thermal transfer (default setting using a ribbon),
Direct thermal (no ribbon)

Advertising