Zebra Technologies Z6Mplus - Manual (Page 97)

Routine Care and Adjustments
Cleaning Procedures
13163L Rev. 3 5/20/2004 Z4Mplus/Z6Mplus User Guide 79
Clean the Sensors
Brush or vacuum any accumulated paper lint and dust away from the printer sensors. Refer to
Figure 35 . The reflective sensor, transmissive sensor, and ribbon sensor should be cleaned on a
regular basis to ensure proper operation of the printer. For printers with the peel-off, liner
take-up, and/or rewind option(s) installed, clean the take label sensor as well.
Figure 35 • Cleaning the Sensors
1 Transmissive Sensor
2 Reflective Sensor
3 Ribbon Sensor
4 Take-Label Sensor
4
2
1
3