Zebra Technologies Z6Mplus - Manual (Page 23)

Introduction
Front Panel
13163L Rev. 3 5/20/2004 Z4Mplus/Z6Mplus User Guide 5
Print Modes
You can view the current print mode on the LCD on the front panel of the printer. Refer to
Configuration and Calibration LCD Displays on page 57 for more detailed information. Print
modes should match the media and printer options chosen. Print mode choices are listed in
Table 2 .
Table 2 • Print Mode Options
Mode Printer Option Action
Tear-Off Mode
(Default setting) Use for most applications. Each label or strip of labels can be torn off
after printing.
Peel-Off Mode Use only if printer has the peel option. Liner material is peeled away from the
label as it is printed. After the printed label
is removed the next label prints.
Cutter Mode Use only if printer has a cutter option. Printer automatically cuts the label after it
is printed.
Rewind Mode Use only if printer has the rewind option. The media and/or liner are rewound onto a
core as they are printed.