Zebra Technologies Z6Mplus - Manual (Page 63)

Printer Operation
Print a Network Configuration Label
13163L Rev. 3 5/20/2004 Z4Mplus/Z6Mplus User Guide 45
Print a Network Configuration Label
If you are using a print server, you can print a network configuration label after the printer is
hooked to the network. A network configuration label lists the settings for the wired ZebraNet
PrintServer II (PSII) and the ZebraNet Wireless Print Server (if installed).
To print a network configuration label, complete these steps:
1. From the front panel, press SETUP/EXIT.
2. Scroll through the parameters until you reach LIST NETWORK .
3. Confirm printing.
A network configuration label prints (
Figure 29 ).
Figure 29 • Network Configuration Label