Yamaha SRCP - Manual (Page 158)

10-
12
10
OTHER OPERA
TIONS
10-4 SERVICE mode function
7) When the setting has been changed, the memory
write screen appears.
To save the change permanently (retain the
change even after the controller power is turned
off), press
F1 (SAVE).
To save the change temporarily (retain the
change until the power is turned off), press
F2 (CHG).
To cancel changing the setting, press
F3 (CANCEL).
[SYS-SAFE-SVCE-DEV]
data = 1
PB/DI valid
1SAVE2CHG 3CANCEL
[SYS-SAFE-SVCE-DEV]
data = 1
PB/DI valid
8) When writing is complete, the screen returns
to step 6.
n
NOTE
The password is identical to the SRCP controller's version number. For example, if the controller version is 24.00,
enter 24.00 as the password. Once the password is accepted, it will not be requested unless the TPB is disconnected
from the controller or the controller power is turned off.