Yamaha SRCP - Manual (Page 170)

10-
24
10
OTHER OPERA
TIONS
10-8 Using the internal flash ROM
10-8-1 Saving the parameter data onto the flash ROM
n
NOTE
The internal flash ROM can be used when the SRCP controller version is 24.10 or later and the TPB version is
12.51 or later.
1) On the initial screen, press F3 (SYS).
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
1PRM 2B.UP3INIT 4next
[SYS]
select menu
[SYS-B.UP]
select menu
1CARD2FROM
2LOAD3INIT
[SYS-B.UP-FROM]
FROM : 04.03.01
auto load : Invalid
1SAVE
2no
[FROM-SAVE]
press EMG.button
1yes
[FROM-SAVE]
data is saved on
FROM initialize OK?
[FROM-SAVE]
make identification
ID=_
effective key [0
→9-.]
2) Next, press F2 (B.UP).
3) Press F2 (FROM).
4) The ID number and auto load function setting
in the flash ROM appear on the screen.
Press
F1 (SAVE) here.
5) Press the emergency stop button on the TPB.
6) A confirmation message appears if data is
stored in the flash ROM.
To initialize the flash ROM, press
F1 (yes).
To cancel, press F2 (no).
7) Set an ID number for the data to be saved.
Using the number keys, the "-" (minus sign)
key and the "." (period) key, enter a number
of up to 9 characters and then press
.