VEGA VEGAPULS 56V - Manual (Page 47)

VEGAPULS 56V 47
S E N S O R D I S P L AY 1 2 3 4 5 6 7 8
ESC
+ -
OK
- +
1 2 C 5 6 7 8 4 3
Commu-
nication + -
4...20mA
Display
1 2 C 5 6 7 8 4 3
VBUS
- +
ESC
OK
Tank 1
m (d)
12.345
Electrical connection
5.3 Connection of the external indi-
cating instrument VEGADIS 50
Loosen the four screws of the housing cover
on VEGADIS 50. You can facilitate the con-
nection procedure by fastening the housing
cover during connection with two or one
screw on the right of the housing (figure).
Note:
VEGADIS 50
Screws
Input from
sensor
DISPLAY
(to the indicating module in
the sensor)
Terminal strip in
VEGADIS 50
Voltage
supply
Adjustment
module
The four-wire connection cable to VEGADIS
50 should be screened and can have a
length of max. 25␣ m. The digital signals to the
indicating instrument would be interfered in
case of longer connection cable by the cable
capacities. The cable screen must be
earthed together with the signal line screen
on the sensor.
M20 x 1,5
(diameter of the
connection cable
5…9␣ mm)