VEGA VEGAPULS 56V - Manual (Page 77)

VEGAPULS 56V 77
loop - Measurement loop designation“ opens.
Enter here:
– a measurement loop number
– a measurement loop description
– and coordinate to your sensor one or sev-
eral output signals.
• Configure e.g. a current output by clicking
to "Current output“.
In the menu window " Configure current out-
put“ you choose in your VEGALOG a current
output card and coordinate to the sensor one
or several current outputs.
• Confirm your adjustment with "OK“ and you
are again in the window " Create new mea-
surement loop - Measurement loop desig-
nation“
• Also here confirm your adjustments with
"OK“.
Set-up
• Choose the serial number of the sensor
which you want to coordinate and confirm
with "OK“.
• Click in the menu window " Create new
measurement loop - Sensor configuration“
to "Continue“.
• Click in the menu window " Create new
measurement loop - Measurement loop
designation“ to "Level“.
The menu window " Create new measurement