VEGA VEGAPULS 56V - Manual (Page 51)

VEGAPULS 56V 51
In the heading of the opening menu window
you now see the previously entered mea-
surement loop name and the description.
• First choose "Adjustment“.
• Click in the menu window "
Adjustment“ to
"Min/Max-adjustment“.
The menu window " Min/Max-adjustment“
opens.
Set-up
• Enter in the field " Measurement loop de-
scription“ a measurement loop name.
In this menu window you can choose with
which output signals your level should be
provided, e.g. as current, voltage, relay
signal etc.
• Confirm your adjustments with "OK“.
The previous menu picture appears again.
• Click to "Quit“ and wait until your adjust-
ments are transmitted.
You have created a measurement loop in the
signal conditioning instrument.
Parameter adjustment
In the menu " Instrument data/Parameter ad-
justment“ you carry out all important sensor
adjustments.
Adjustment
• Choose the menu "Instrument data/Param-
eter adjustment“ and then the sensor for
which you want to carry out the parameter
adjustment.
When you have only configured one sensor
on the signal conditioning instrument, natu-
rally you will only have one sensor as choice.