VEGA VEGAPULS 56V - Manual (Page 57)

VEGAPULS 56V 57
If a smaller measuring range is selected as
previously adjusted in the "
Min/Max-adjust-
ment“, the sensor is caused to provide e.g.
the measured values only from 20␣ …␣ 60␣ %
instead of 0␣ …␣ 100␣ % (reduction of the mea-
suring window).
In the example the
- min-adjustment was set to 0,500 m and the
- max-adjustment to 3,400 m.
• Save the adjustments with "OK“
• Click in the menu window "
Meas. environ-
ment“ to "Measuring conditions“.
• In the menu window " Measuring conditions“
you click to the options corresponding to
your application.
• Confirm with "OK“.
After a few seconds of saving (the adjust-
ments are permanently saved in the sensor)
you are again in the window "
Meas. environ-
ment“.
Set-up
• First click to "Meas. environment“.
The window " Meas. environment“ opens.
With the menu point " Measuring range“ you
can define the measuring range of the sensor
deviating from the "
Min/Max-adjustment“. As
a standard feature the measuring range
corresponds to the values adjusted with the
min/max-adjustment.