I/o setting and application, 1 i/o monitoring and control – SENA Rhio10 User Manual
Page 32
Advertising
32
4. I/O Setting and Application
4.1 I/O Monitoring and Control
You can monitor, control and set I/O states by pressing the [I/O PORT CONTROL] button.
Once [I/O PORT CONTROL] is invoked, Rhio Manager begins to monitor the I/O state by
connecting to a local port of Rhio10 via a TCP socket. To allow this process, the Rhio10 should
be set to TCP server mode.
4.1.1 LED
-
ON : Red Icon
-
OFF : Blue Icon
-
Disable : Grey Icon
-
Condition ON/OFF : Green Icon
-
Macro: M
-
Delay ON: Red D
-
Delay OFF: Blue D
-
Pulse: P
-
Level Mode ADC Port : Green
Figure 4-1 The I/O port Control screen
Advertising