SENA Rhio10 - Manual (Page 60)

60
5 - Field Separator 0x2C ( “,” )
6 -
0x30: AVcc ( Vcc 5V ) -> default
0x31: Internal ( 2.56V )
0x32: External ( 2-4.5V )
ADC Reference
Setting
7 - Field Separator 0x2C ( “,” )
8-11 I1-I4 0x31: Enable, 0x32: Disable
12 - Field Separator 0x2C ( “,” )
13-16 I5-I8 0x31: Enable, 0x32: Disable
17 - Field Separator 0x2C ( “,” )
18-21 I9-I12 0x31: Enable, 0x32: Disable
Input Port
22 - Field Separator 0x2C ( “,” )
23-26 O1-O4 0x31: Enable, 0x32: Disable
27 - Field Separator 0x2C ( “,” )
28-31 O5-O8 0x31: Enable, 0x32: Disable
32 - Field Separator 0x2C ( “,” )
Output State
33,34 O9, O10 0x31: Enable, 0x32: Disable
All I/O ports are initially set to Enable (including Factory Reset).
All ADC ports are initially set to Level Input mode (including Factory Reset).
5.3.7.2 Response for Set Port Enable command
Response Data Remark
Byte Size 2 35
“12”
( 0x31, 0x32 )
Return the Enable
setting.
Port Enable/Disable
setting data
Return all port
Enable/Disable
settings.
- Data
Field
Data
Order
Port Data Content
Setting 1 -
0x30: Normal Enable,
0x31: Not in Setting mode
0x39: Abnormal Enable