SENA Rhio10 - Manual (Page 53)

53
8-12 A2
0x30: OFF,
0x31: ON (Switch Input),
0x39: Level Mode
“0000”-”1023”:
Level
13 - Field Separator 0x2C ( “,” )
14-18 A3
0x30: OFF,
0x31: ON (Switch Input),
0x39: Level Mode
“0000”-”1023”:
Level
19 - Field Separator 0x2C ( “,” )
20-24 A4
0x30: OFF,
0x31: ON (Switch Input),
0x39: Level Mode
“0000”-”1023”:
Level
25 - Field Separator 0x2C ( “,” )
26-29 I1-I4 0x30: OFF, 0x31: ON
30 - Field Separator 0x2C ( “,” )
31-34 I5-I8 0x30: OFF, 0x31: ON
35 - Field Separator 0x2C ( “,” )
Input
State
36-39 I9-I12 0x30: OFF, 0x31: ON
40 - Field Separator 0x2C ( “,” )
41-44 O1-O4
0x30: OFF, 0x31: ON, 0x32: Wait for a conditional
execution,
0x33: Wait for Delay ON, 0x34: Wait for Delay OFF,
0x35: Run PULSE
45 - Field Separator 0x2C ( “,” )
46-49 O5-O8
0x30: OFF, 0x31: ON, 0x32: Wait for a conditional
execution,
0x33: Wait for Delay ON, 0x34: Wait for Delay OFF,
0x35: Run PULSE
50 - Field Separator 0x2C ( “,” )
Output
State
51,52
O9,
O10
0x30: OFF, 0x31: ON, 0x32: Wait for a conditional
execution
0x33: Wait for Delay ON, 0x34: Wait for Delay OFF,
0x35: Run PULSE
- Indication that the system is standby when conditional execution for output port,
pulse/delay operations are active (with ON command).